UniPOS
Fire Control Panel FS5200
Instruction manual
Page 21
Revision 8/07.17
of 69
10.2.2.2. Upon detection of New configuration or non-fatal errors, and the fire control panel
is not in Fire condition, appear the following information screens:
New configuration:
(The field
“ЕEЕ” contains the number of the faults)
Fault in the program of Linear processor 2:
(The field “ЕEЕ” contains the number of the faults)
Fault in the program of Linear processor 3:
(The field “ЕEЕ” contains the number of the faults)
Fault in the data in Linear processor 2:
(The field “ЕEЕ” contains the number of the faults)
Fault in the data in Linear processor 3:
(The field “ЕEЕ” contains the number of the faults)
Fault in real time clock:
(The field “ЕEЕ” contains the number of the faults)
Fault in external memory:
((
The field “ЕEЕ” contains the number of the faults)
Wring record in the external memory:
(The field “ЕEЕ” contains the number of the faults)
Fault in a line:
(
The field “ЕEЕ” contains the number of the faults;
“NN” contains the number of the line in fault condition;
“Status” contains the state of the line, i.e. the type of the
fault)
Duty 17:05:34
Flt:ЕEЕ LnNN Status
Duty 17:05:34
Flt:ЕEЕ Flt Wr EPROM
Duty 17:05:34
Flt:ЕEЕ Fault EEPROM
Duty 17:05:34
Flt:ЕEЕ Fault Timer
Duty 17:05:34
Flt.ЕEЕ Fault Data 3
Duty 17:05:34
Flt:ЕEЕ Fault Data 2
Duty 17:05:34
Flt:ЕEЕ Fault Code 3
Duty 17:05:34
Flt:ЕEЕ Fault Code 2
Duty 17:05:34
Flt:ЕEЕ New config
