UniPOS
Fire Control Panel FS5100
Instruction Manual
Page 7
Revision 7/06.12
Of 47
time for the selected fire alarm line is indicated on the LCD display. During the remaining time actions
can be taken, for example press
or
.
RELAY OUTPUT – relay, potential free, switching outputs that control external executive devices.
SHORT CIRCUIT IN A LINE OR IN A CONTROLLABLE OUTPUT –
non-fatal fault condition
,
entered due to registered current in a
line
or in a
controllable output
, exceeding a threshold value. The
threshold value for each line shall be user defined.
SYSTEM ERROR –
fatal fault condition
due to a fault in system’s basic component.
SYSTEM OPERATION – the fire control panel executes internal operations to set its registers.
This is visualized on the LCD display with a text message for system operations, before the user is
allowed to proceed with his work with FS5100.
3. Function
Fire control panel FS5100 is designed to operate with conventional automatic fire detectors and
manual call points. The panel has outputs provided for external executive devices. Its modular
structure allows for variable configurations according the specific features of the protected site.
4. Technical data
4.1. Modules
4.1.1. Type of modules
−
Basic module
−
Additional modules:
♦
Module 5101
♦
Module 5102
−
Power supply module
4.1.2. Features
−
Basic module
- 2 lines
- 2 controllable outputs
- 2 relay outputs for fire condition
- 1 relay output for fault conditions
- interface RS232 / RS485*
- power supply for modem*
* At request
−
Мodule 5101
- 3 lines
- 3 relay outputs for fire condition
−
Мodule 5102
- 6 lines
- 3 relay outputs for fire condition
4.2. Physical configuration
4.2.1. Basic configuration
−
Мodules
- Basic module
- Power supply module
−
Features
- 2 lines
- 2 controllabe outputs
- 2 relay outputs for fire condition
- 1 relay output for fault conditions
4.2.2. Expanded configuration
−
Modules
- Basic module
- Module 5101
- Power supply module
