UniPOS
Fire Control Panel FS5100
Instruction Manual
Page 22
Revision 7/06.12
Of 47
On information screens the button
is not active; the rest three buttons retain their functions.
When a command screen is activated, a cursor appears. In this case the buttons have the following
effect:
−
Press button
to save a change in a parameter or to execute a selected command;
afterwards the screen is deactivated and the cursor disappears (differences in button’s effect
in some cases are explicitly stated);
−
Press button
to deactivate the screen without saving any changes or without execution
of the relevant command; the cursor disappears;
−
Button
is active only on screens for parameter change, when the cursor selects a digit.
Press it to move the cursor with one position to the right. When the last right position of the
parameter is reached the cursor moves to its first position;
−
Button
is active only on screens for parameter change. Press it to increase the selected
digit or to increase the parameter to the next possible rate (when the cursor is to the right of
the parameter). In both cases, when the maximum possible rate is reached, a transition to the
lowest possible rate is made.
When the fire control panel enters Information and Control Mode a transition to the first menu is
made. The menu contains the following subordinate menus and information screen:
−
System functions (subordinate menu);
−
Disabled controllable outputs (information screen);
−
Status (subordinate menu).
13.2.
Menu
System functions
Screen for selection:
The menu contains the following subordinate menus and functions:
−
LED and sound indicators check up;
−
Fire alarm lines test;
−
Disable fire alarm lines;
−
Disable controllable outputs;
−
Current in the lines;
−
Setting the real time clock;
−
Parameters check;
−
Adjustment;
−
Archive review.
The subordinate menus can be entered at Access level 2, i.e. when the key on the front panel is
turned to position
.
13.2.1. Function
LED and sound indicators check up
Screen for activation:
To activate the function press button
, and a cursor
appears on the screen:
When the button
is pressed, all LED indicators illuminate and the sound indicator releases
continuous sound signal as long as the button is being pressed. To deactivate the function press
button
; the cursor disappears.
Indicators check
_
Indicators check
Syst Functions
