unipo UFP 6" Operating Manual Download Page 58

Page: 58 / 96

Universal unipo® Flat Panel UFP

Software description

Revision status 19.01.2010

6.6.8 Miscellaneous settings -

MISC. SETTINGS

The next selection window is the menu

MISC. SETTINGS

This menu window contains adjustment possibilities which normally do not need to be
adjusted.

The structure is slightly different, because it has additional sub-menus. For reasons of clarity
all sub-menus are shown here. In reality only four lines are displayed at a time.

The header

MISC. SETTINGS

is always displayed.

Fig. 22: Menu

MISC SETTINGS

•

Select the different sub-menus with the navigation keys [

►

] and [

◄

The currently valid line is highlighted in color.

•

Press key [

] to open the corresponding sub-menu.

MISC. SETTINGS

►

MISC. SETTINGS

►

Colors: 262144
Contrast: auto
RGB Offset 16
Write prot.: on

Summary of Contents for UFP 6"

































































































Search results

Summary of Contents for UFP 6"

Reviews:

Related manuals for UFP 6"

Brands by name

Popular brands

unipo UFP 6", Operating Manual

Search results

Summary of Contents for UFP 6"

Reviews:

Related manuals for UFP 6"

Brands by name

Popular brands