unipo UFP 6", Operating Manual

Page: 20 / 96

Universal unipo® Flat Panel UFP
Transport, packing and storage
18
Revision status 19.01.2010
3.3 Storage
After unloading, the packing units must be stored up to time of assembly in compliance with
the attached shipping labels.
Packed machine parts and accessories must not be unpacked.
The following instructions apply for storage:
• Store in a dry place.
• Also, make sure that packing units are not stored outdoors.
Furthermore, make sure that the floor of the warehouse is dry during storage.
• Protect against direct sunlight.
• Store in a dust-free environment.
• Avoid mechanical vibrations and accidental damage.
Check preservation measures if storage is for longer periods of more than approx. 3 months.
Under highly aggressive weather conditions the preservation may need to be renewed.
3.3.1 Ambient conditions during transport and storage
Designation Technical data
Ambient temperature -20°C to +65°C
Temperature change max. 5°C/min
Relative humidity max. 85 %
Air pressure/altitude max. 12.000 m above sea level
Condensation none
Recovery time 2h
Table 1: Ambient conditions