unipo UFP 6", Operating Manual

Page: 17 / 96

Universal unipo® Flat Panel UFP
Safety
Revision status 19.01.2010
15
2.6 System control
The device is used in an overall plant system and serves the visualization of processes and
data. The customer must make sure that the device is connected to the system control in
agreement with the applicable accident prevention regulations.
For this purpose, the following points must be observed:
In case of a power failure the control system must disconnect all connection lines.
The system control must recognize an electrical short circuit and disconnect all connection
phases immediately.
2.7 Operating personnel
The device must only be operated and serviced by authorized, qualified and instructed
personnel. These persons must have received special instructions regarding any dangers
that may occur.
An instructed person is a person who has learned about and, if necessary, has been
instructed practically in the tasks entrusted to her/him and the possible dangers resulting
from improper actions, as well as about the necessary safety features and protective
measures.
Qualified personnel include those who can assess the work entrusted to them and recognize
potential dangers based on their specialist training, knowledge and experience as well as
their knowledge of relevant regulations.
Inexperienced personnel without profound knowledge must be trained accordingly.
Responsibilities for operation and maintenance must be clearly determined and adhered to
so that there is no unclear division of competency with regard to safety.
The device must only be operated and serviced by persons who can be expected to carry out
their work reliably. For this purpose, any mode of operation that adversely affects the safety
of persons, the environment or the device is to be avoided.
Persons who are under the influence of drugs, alcohol or medication that affects their
responsiveness may
under no circumstances
carry out work on or with the device.
When choosing personnel, attention must be paid to the regulations protecting young
workers in the relevant country regarding the minimum age and, if necessary, to the job-
related instructions based on this.
The operator must also ensure that no unauthorized persons work on or with the device.
Unauthorized persons, such as visitors etc., may not come into contact with the device. They
must keep an appropriate safety distance.
The operator is obliged to report immediately any changes to the device, which may
adversely affect the safety of the operator.