unipo UFP 6", Operating Manual

Page: 24 / 96

Universal unipo® Flat Panel UFP
Design of the UFP
22
Revision status 19.01.2010
4.2.1.1 The display unit
The display unit has the function of visualizing the processes.
It is a TFT flat screen and replaces the old tube display of the original monitor.
Connection to the electronic unit is accomplished through the unipo
®
video bus.
UFP Device Tube display of original monitor
6" 9"
8" 9" and 10"
10" 12"
12" 14" and 15"
15" 17"
17" 19" and 20"
19" 21" and 22"
Table 3: UFP-Type vs. tube display
4.2.2 The control unit
The control unit is used to set parameters via the on-screen display (OSD). Connection is
accomplished through a 6-pin Mini-DIN-plug on the back of the device.
4.2.3 Input module (I-Module)
The input module serves the purpose of connecting the video plug.
It provides several plugging possibilities, because it can be universally used.
The input plug needed for the application is marked "Video-In".
There are mainly 2 versions available:
Basic module Input plug
9, 15 and 25 pin Sub-D
I-Module-TTL
12, 16 and 20 pin Ribbon cable plug
9, 15 and 25 pin Sub-D
12, 16 and 20 pin Ribbon cable plug I-Module-Analog
5 x BNC, 15 pin Sub-HD
Table 4: Basic modules with existing input plugs