unipo UFP 6", Operating Manual

Page: 54 / 96

Universal unipo® Flat Panel UFP
Software description
52
Revision status 19.01.2010
6.6.6 Adjusting horizontal image size -
VERT. EXPANSION
The next selection window is the menu
VERT. EXPANSION
.
The currently valid parameter is displayed.
Fig. 18: Menu
VERT EXPANSION
Here the vertical expansion factor can be set.
• Press key [ ] to open the menu
VERT. EXPANSION
.
Figure
Fig. 19: Menu window
VERT. EXPANSION
• Use the navigation keys [ ► ] and [ ◄ ] to set a value between factor 1:1 and 5:1. The
currently valid line is highlighted in color.
Besides the currently set factor the information in parenthesis indicates whether the
expansion is achieved by interpolation (
interpolated
) or by duplication
(
duplicated
) or if no expansion (
not expanded
) takes place.
or
• Press function key [
F
] to automatically determine a new vertical expansion.
• Press key [ ] to activate the selected parameter.
(The changeover will take place immediately and the main menu
VERT. EXPANSION
appears again).
or
• Press key [
ESC
] to reject the changes.
(The main menu
VERT. EXPANSION
appears again.)
Changes must be saved in the main menu
EXIT/SAVE
.
ATTENTION!
With each adjustment the vertical image position is corrected.
VERT. EXPANSION ►
13:8
(interpolated)
VERT. EXPANSION ►
13:8
(interpolated)
[F]: Suggestion