unipo UFP 6", Operating Manual

Page: 78 / 96

Universal unipo® Flat Panel UFP
Maintenance
76
Revision status 19.01.2010
7.2.2 Fan maintenance
If the UFP is continuously used, the fan must be replaced at the latest after 2 years (or
approx. 20.000 operating hours).
The new fan is delivered with replacement instructions.
With the following data the fan can be directly ordered from unipo
®
:
Name DC-Fan 12V
Spare parts number FLL012D15010
7.3 Measures after maintenance work
Please observe after maintenance work and before switching on the device:
• Check all previously loosened screw connections for tight fit.
• Check all previously loosened plug/cable connections for tight fit.
• Check whether all previously removed covers are properly installed again.
• Make sure that all tools, materials and other equipment used were removed again from
the work area.
• Clean up the work area and remove any substances, such as fluids or similar, that may
have leaked out.
• Make sure that all safety features on device and system are restored to good working
order.