unipo UFP 6", Operating Manual

Page: 12 / 96

Universal unipo® Flat Panel UFP
General
10
Revision status 19.01.2010
1.6 Spare parts
ATTENTION! Danger of damage to the device!
Wrong or faulty spare parts can cause damage, malfunction or even total failure
of the device!
Only use original spare parts from the manufacturer.
When using unapproved spare parts any claims concerning warranty, service, damage and
liability against the manufacturer or his representatives, dealers and agents will become null
and void.
1.7 Disassembly
When taking out of service clean the device and dismantle it under due consideration of
applicable industrial safety and environmental regulations.
WARNING! Danger of injury!
Edged components, sharp points and corners on and inside the device or on the
required tools can cause injuries.
Any work for disassembling the device must therefore only be carried out by
qualified specialists.
Before starting disassembly work:
– Switch off the entire system and secure against switching on again.
– Physically disconnect the complete power supply from the device, relieve stored
energy residues as specified
– Dispose of operating and auxiliary materials as well as rests of processing materials
environmentally
1.8 Waste disposal
If not agreement concerning the return or waste disposal has been made, all parts should be
directed to recycling after proper disassembly:
• Metal material residues are to be scrapped
• Any other components must be sorted by their material properties