Uninterruptible Power Supplies PowerWAVE 8000DPA RI, User Manual

Page: 43 / 76

UPS338-01-00 PowerWAVE 8000-RI DPA User Manual Dated 5 April 2013
4-1
4
Operation
4.1 Commissioning
The PowerWAVE 8000-RI DPA UPS is a high quality electronic machine that must be commissioned by a
fully trained and authorised Uninterruptible Power Supplies Ltd. field service engineer before being put into
use.
The commissioning engineer will:
• Connect the UPS battery.
• Check the UPS electrical installation and operating environment.
• Performing a controlled UPS start-up.
• Fully test the UPS system for correct operation and set-up.
• Carry out customer operator training.
4.2 Operator Control Panel
Figure 4.1 illustrates the Control Panel located on the front of each UPS module.
Figure 4.1 Operator Control Panel
WARNING:
Any PowerWAVE 8000-RI DPA UPS system not commissioned by an
Uninterruptible Power Supplies Ltd. field service engineer must be considered an electrical
hazard and Uninterruptible Power Supplies Ltd. accepts no responsibility for its safe operation
or the safety of any operating personnel. Additionally, the manufacturer's warranty is
immediately invalidated if the UPS is put into use before it has been correctly commissioned.