Uninterruptible Power Supplies PowerWAVE 8000DPA RI, User Manual

Page: 18 / 76

3: Installation
3-2
UPS338-01-00 PowerWAVE 8000-RI DPA User Manual Dated 5 April 2013
3.3 Unpacking
If the packages are received in good order (i.e. the ‘tip & tell’ “FRAGILE” and “ARROW” indications on the
packing container are intact) then perform the following steps to unpack the UPS:
1. Cut the wrappers and remove the packing container by pulling it upwards.
2. If the equipment is shipped inside a wooden case, remove the screws at the base and sides of the case
then carefully remove the case from the equipment.
3. Remove the plastic sheeting covering the UPS.
4. Remove the UPS from the pallet.
5. Retain the packaging materials for future shipment of the UPS.
6. Examine the UPS for any sign of damage and notify your supplier immediately if any damage is
apparent.
7. Open the cabinet door and ensure that all the UPS modules are correctly (and securely) fitted in their
UPS module compartments. Ensure that a protection cover is correctly fitted to the front of any empty
UPS compartments.
3.3.1 Nameplate
The technical specifications of the PowerWAVE 8000-RI DPA are provided on the nameplate which is
situated at the front of the UPS.
Check that the details on the nameplate corresponds to the purchased material detailed on the delivery note.
3.4 Batteries
The standard batteries connected to the UPS are sealed, maintenance-free batteries which will be mounted
on shelves either within the UPS sub-rack or in an external battery cabinet. The battery will usually be
assembled and connected when the UPS is commissioned.
The working life of the Battery is greatly affected by the ambient temperature and will be optimum when
operated at a temperature of 20°C.
If the UPS is delivered without batteries, Uninterruptible Power Supplies Ltd is not responsible for any
damage or malfunctioning caused to the UPS by the incorrect storage, installation or connection of batteries
by third parties.
3.5 Storage
3.5.1 UPS Module
If you plan to store the UPS prior to use, it should be stored in a clean dry environment with a temperature
b5°C to +40°C and RH of less than 90%. If the packing container is removed, you must protect the
UPS from dust.
CAUTION: Storage:
– The UPS should be stored in the original packing and shipping carton.
– The recommended storing temperature for the UPS system and batteries is b5 °C
and +40°C.
– The UPS system and the battery sets must be protected from humidity
< 90% RF (non-condensing).
WARNING:
The UPS system, the battery cabinet (option) and the batteries are heavy and
may tip during transportation causing serious injury if the unpacking instructions are not
followed closely.