Uninterruptible Power Supplies PowerWAVE 8000DPA RI, User Manual

Page: 6 / 76

:
-ii
UPS338-01-00 PowerWAVE 8000-RI DPA User Manual Dated 5 April 2013
3.12 Module interfacing facilities 3-23
3.12.1 Smart Port JD1 (Serial RS 232) and USB Port 3-23
3.12.2 X1 & X2 Dry Port (volt-free contacts) 3-24
4 Operation
4.1 Commissioning 4-1
4.2 Operator Control Panel 4-1
4.2.1 Power Management Display (PMD) 4-2
4.2.2 Mimic LED indicators 4-2
4.3 Description of the LCD display 4-3
4.3.1 Status screens 4-3
4.3.2 Main menu screen 4-4
4.3.3 Event log menu screen 4-4
4.3.4 Measurements menu screen 4-4
4.3.5 Commands menu screen 4-5
4.3.6 UPS Data menu screen 4-6
4.3.7 Set-Up Service menu screen 4-6
4.3.8 Set-up User menu screen 4-6
4.3.9 Set-Up Service menu screen 4-7
4.4 Operating Modes 4-7
4.4.1 On-Line (Inverter) mode 4-7
4.4.2 Bypass (Line-Interactive) Mode 4-7
4.4.3 Maintenance Bypass Mode 4-8
4.5 Operating Instructions 4-9
4.5.1 Starting the UPS system from the Maintenance Bypass 4-9
4.5.2 Individual UPS Module start/stop procedure 4-11
4.5.3 Transfer to Maintenance Bypass Mode 4-12
4.5.4 Complete system shutdown 4-14
4.6 Replacing a UPS Module in a Single Module System 4-15
4.6.1 Extracting the UPS Module 4-15
4.6.2 Refitting the UPS Module 4-15
4.7 Replacing a UPS Module in a REDUNDANT Multi-Module System 4-16
4.7.1 Extracting the UPS Module 4-16
4.7.2 Refitting the UPS Module 4-17
4.8 Replacing a UPS Module in a CAPACITY Multi-Module System 4-17
4.8.1 Extracting the UPS Module 4-17
4.8.2 Refitting the UPS Module 4-18
5 Maintenance
5.1 Introduction 5-1
5.2 System calibration 5-1
5.3 User responsibilities 5-1
5.4 Routine maintenance 5-1
5.5 Battery Testing 5-2
5.6 Battery Maintenance 5-2
5.7 Battery Disposal and Recycling 5-2
6 Troubleshooting
6.1 Alarms 6-1
6.2 Menu, Commands, Event Log, Measurements, 6-1
6.3 Fault Identification and Rectification Messages and Alarms 6-2
6.4 Contacting Service 6-2
7 Options
7.1 Introduction 7-1