manualshive.com logo in svg

Uninterruptible Power Supplies PowerWAVE 8000DPA RI, User Manual, Page: 14 / 76

Share
Download
Uninterruptible Power Supplies PowerWAVE 8000DPA RI User Manual Download Page 14

2:  General Description

2-4

UPS338-01-00 PowerWAVE 8000-RI DPA User Manual Dated 5 April 2013

2.6

Extended Warranty

The Standard Warranty may be enhanced by protecting the UPS with an Extended Warranty Agreement
(maintenance contract).

An Extended Warranty Agreement enhances the standard warranty by providing the following:

• Regular preventative maintenance inspections.
• Guaranteed speed of response to operational problems.
• 24 hour telephone support.
• Fully comprehensive cover (EXCLUDING BATTERIES & CAPACITORS).
• Contact the Service Support Hotline on 0800 731 3269 for further details.

2.7

Additional Service/Maintenance Support

In addition to providing support for the PowerWAVE 8000-RI DPA, Uninterruptible Power Supplies Ltd are
able to provide maintenance and support on a wide range of different UPS products.

If you are interested in an extended warranty for your PowerWAVE 8000-RI DPA, or any other UPS you may
have, please complete the enquiry form shown opposite and return or FAX to:

Uninterruptible Power Supplies Ltd.
Woodgate
Bartley Wood Business Park
Hook
Hampshire
RG27 9XA

Tel:

01256 386700
0800  731  3269 (24 Hr.)

Fax:

01256 386701

Email: [email protected]

Summary of Contents for PowerWAVE 8000DPA RI













































































Reviews:

No comments