Page 25
3 Navigating
You can set up your route in different ways:
• If you need a route for immediate navigation, you can select the destination and start navigating to
it right away (normal navigation).
• You can also plan a route independently of your current GPS position or even without GPS
reception (to achieve this, you need to turn off the GPS receiver and set a new starting point in the
Settings menu - see page 51).
3.1 Selecting the destination of a route
The software offers you several ways of choosing your destination:
• Enter a full address or a part of an address, for example a street name without a house number or
the names of two intersecting streets (page 25). If you only know the street address and not the city/
town then see the tip on how to select ALL cities within the state (page 26).
• Enter an address with postal code (page 34). This way you do not need to select the name of the
settlement and the search for street names might be faster as well.
• Use a built-in Place of Interest as your destination (page 36).
• Select a location on the map with the Find on Map feature (page 46).
• Use a previously saved Favourite destination (page 46).
• Select a location from the History of previously used destinations (page 48).
3.1.1 Entering an address or part of an address
If you know at least a part of the address, it is the quickest way to select the destination of the route.
Using the same screen, you can find an address by entering:
• the exact address, including house number
• the centre of a city/town
• an
intersection
• the midpoint of a street
• any of the above, starting the search with the postal code (page 34)
3.1.1.1 Entering an address
To enter an address as the destination, do as follows:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following buttons:
,
.
3. By default, the software proposes the country, state and settlement where you are. If needed, tap
the button with the name of the country, enter the first few letters of the country name on the keyboard,
and select a different one from the list. If you select a new country, you also need to select the state, or
select the name of the country where it stands without a state to search for an address in all its states.
