Operating Manual
TYTAN premium
- page 5 -
NOTE:
During several first hours of operation you need to pay special
attention to correct tightening of the bolts.
When the workday is completed, you need to clean the manure spreader carefully, rinse it with
water, and when
it’s dry - check for any damages of the paint layer and cover them with a thin
layer of oil.
Technical inspection should be carried out once a month or after 1500
2000 km.
V. GENERAL AND COMMERCIAL INFORMATION
Agricultural machines are provided with a guarantee if the provisions of the Operating Manual are
observed, referring to proper exploitation and maintenance. More detailed information on the
mode of submitting complaints are included in the guarantee cards, attached to each machine
together with the Operating Manual.
NOTE:
The rated plate is located within the front part of the machinery, on the
frame beam, on its right side.
The spreader includes jointed-telescopic shafts, with transfered
torque of 540 N.
While coupling the jointed-telescopic shaft with the tractor and machinery,
the tractor’s engine and PTO must be absolutely turned off, and the key
must be taken out of the ignition switch.
A wide angle jointed shaft with a symbol listed in the table below is manufactured by Bondioli
& Pavesi, and it is provided with a safety symbol:
Technical details:
- symbol
7G7R101CEWR7R09
- rated torque
830 Nm
- rated power
47kW
- rated shaft length
1540 mm
NOTE:
You need to turn off the tractor’s PTO before turning and while carrying out the
transportation travels.
You must not implement any modifications or carry out repairs on your
own, otherwise the guarantee will become void.
