Operating Manual
TYTAN premium
- page 9 -
A -
A
5. Structure and
operation.
5.1 Power transmission system (Fig. 3.1)
Fig. 3.1 Power transmission system scheme.
1 - jointed-telescopic shaft; 2 - front bearing sleeve;
3 - jointed shaft; 4 - internal housing; 5 - jointed shaft;
6 - internal housing II; 7 - shaft with a coupling; 8 - vertical adapter.
5.2. Floor conveyor.
The floor conveyor is composed of closed chains connected via strikes, constructed from a hot-rolled
channel bar (Fig. 4).
The conveyor is driven by a hydraulic engine and a hydraulic transmission installed on the spreader’s
right side. The feed rate (dose) is adjusted in a stepless way, with a oil flow regulator, which is located
above the spreader’s drawbar. The conveyor can feed forwards and backwards.
The conveyor is tensed with pressure springs, which at the same time play an amortization role, and
which must be pressed properly. Detailed information about the stretcher are described in point
6.4.3.
1
2
3
Fig. 4
Floor conveyor - a fragment of a chain with a striker.
1 -
conveyor’s chain link, 2 - cover plate of a striker, 3 - a striker
7
