UNIA TWISTER, Operating Instructions Manual

Page: 31 / 96

Operating instructions and part catalogue, BALE WRAPPING MACHINE, TWISTER
Page 31
* There is a possibility to switch off the signals from the sensor S10 signalizing bale presence at load-
ing frame in SERVICE MENU . O
perating in AUTOMATIC mode, it is necessary to push “F” button
when sensor S10 is switched off, to execute bale loading (like in the
„
M
” mode).
During wrapping, the animation of wrapping machine operating is displayed.
Fig. 29 Winding-up animation
When a bale is wrapped-up, the picture of the bale
unloading and the flashing button “
F
” appears.
Fig. 30 Wound-up ballot ejection
When pressed, the bale will be unloaded from the wrapping machine.
SERVICE MENU allows to set AUTOMATIC UNLOADING of the wrapped-up bale, without need to
press
„
F
” button. This setting is not saved after the device power supply is switched off.
WRAPPED BALES COUNTER
Currently selected number of WRAPPED BALE COUNTER is displayed the at the top of screen.
6 independent counters is at disposal. Current value of the selected COUNTER is displayed at its RH
side.
SELECTION of DIFFERENT BALE COUNTER
Use or button to set the arrow marker next to the area with the counter number.
Press and hold button until the arrow marker starts to blink.