Sowing Machine AMBER 900/3
21
Places where the hydraulic hoses must be connected to a tractor are shown on the
Figure 11.
Figure 11
When connecting hydraulic hoses of the sowing machine to the tractor hydraulic
system, make sure that the hydraulic system is not under pressure. During functional
connections of the sowing machine to a tractor special attention must be paid that the
connections are performed in a correct way. Change of correct connections results in
having reversed functions.
10.1.2.3. GREASING
Points of greasing are show on the Figure 12 a-e a. The points are also described in
the greasing table.
Greasing Table
Number of
a greasing
point
Name of
element
Number of
greasing
points
Grade
of
grease
Frequency of
greasing
REMARKS
1
2
3
4
5
6
1
Mixer bearing
2
ŁT 41
every 50 hours
with the use of a
grease fitting
2
Clutch and
clutch shaft
1
ŁT 41
every 50 hours with the use of a
blade
3
Gear box
1
ones a 3 years
4
Driver chain
13/18
4
graphite
grease
ones a year
through immersing
with a blade
5
Marking gauge
plate hub
2
ŁT 41
every 50 hours
with the use of a
grease fitting
6
Actuator
heads
2
ŁT 41
every 50 hours
with the use of a
grease fitting
7
Pressing shaft
bearings
2 lub 4
ŁT 41
every 50 hours
with the use of a
grease fitting
Hydraulic slots on a
tractor for connecting
hydraulic hoses.
