UNIA AMBER 900/3, Manual

Page: 4 / 37

Sowing Machine AMBER 900/3
4
TABLE OF CONTENTS
DECLARATION OF CONFORMITY
2
CERTIFICATE OF APPROVAL THE MACHINE FOR MANUFACTURING 3
2 . INTRODUCTION 5
2.1. WARNING SIGNS 5
2.2. PRINCIPLES CONCERNING THE USE OF THE MACHINE ON PUBLIC ROADS 5
3. TECHNICAL DATA 6
3.1. MACHINE ACCESSORIES 7
4. OCCUPATIONAL SAFETY AND HEALTH RULES 7
4.1. OCCUPATIONAL GENERAL SAFETY AND HEALTH RULES 7
4.2. MAINTENANCE AND SERVICE 9
4.3. LUBRICANTS 9
5. SAFETY INSTRUCTIONS 10
5.1. TRANSPORT AND MOVEMENT 10
6. WARNING SIGNS, LOGO 11
7. OPERATING CONDITIONS 13
7.1. MACHINE OPERATION AND OPERATING CONDITIONS 13
7.2. OPERATING LIMITATIONS 13
8. PRINCIPLE OF OPERATION 14
8.1. DESIGN 14
9. TRANSPORT, HANDLIG AND KEEPING IN SHELTER 17
9.1. TRANSPORT 17
9.2. HANDLING 17
9.3. KEEPING IN SHELTER AND CLEANING 17
10. SOWING MACHINE OPERATING 19
10.1 PREPARATION PROCEDURES FOR PUTTING MACHINE INTO OPERATION 19
10.1.1. UNLOADING METHOD 19
10.1.2. PUTTING THE MACHINE INTO OPERATION 19
10.1.2.1. CONNECTING THE MACHINE TO A TRACTOR 20
10.1.2.2. HYDRAULIC SYSTEM CONNECTION 20
10.1.2.3. LUBRICATION 21
10.1.2.4. OIL LEVEL IN THE GEAR BOX 23
10.2. SETTING AND ADJUSTMENTS 23
10.2.1. ADJUSTMENT OF GATES 23
10.2.2. ADJUSTMENT OF BOTTOMS 24
10.2.3. ADJUSTMENT OF LEVERS 24
10.2.4. FILLING THE SEED BOX 25
10.2.5. TURNING TEST 25
10.2.6. ADJUSTING OF SOWING DEPTH 26
10.2.7. ADJUSTING AND SETTING OF SOWING MARKERS 27
10.2.8. ADJUSTING AND SETTING OF TECHNOLOGICAL PATHS 28
10.2.8.1. ELECTRICAL MECHANISM OF PATHS 29
10.2.8.2. ADJUSTING OF SOWING LEVER 30
10.2.9. SOWING OF SMALL AND LARGE (THICK) SEEDS 31
10.2.10. SETTING OF THE WIDTH BETWEEN SOWING ROWS 33
10.2.11. SETTING OF SCRAPERS 34
11. INFORMATION ABOUT THE MACHINE 34
12. DISMANTLING AND UTILIZATION 35
13. SCOPE OF THE MANUFACTURER’S - LIBILITY 35
13.1 WARRANTY TERMS AND CONDITIONS 36
14. TABLES OF SOWING 37
SURVEY