Sowing Machine AMBER 900/3
19
10. MACHINE OPERATION AND OPERATING CONDITIONS
10. 1. PREPARATION OF THE MACHINE FOR OPERATION
User is responsible for preparing the machine for operation.
10.1.1. METHOD OF THE MACHINE UNLOADING
Figure 9
Loading and unloading the sowing machine must be performed with the use of a
crane and approved chains, lines or belts. The places where the cables, lines or belts
must be mounted can be identified by special markings.
It is also possible to use a fork-lift truck to unload the sowing machine which must be
characterized with the following load capacity: minimum 2,5 tons in case of a
machine with the width of 3 meters, and minimum 3,5 tons in case of a machine with
the width of 4 meters. In both cases approved fork-lift truck fork extensions must be
used. The place where the fork-lift forks must be inserted is shown on the Figure 9.
Caution! The sowing machine must be placed in a stable position on
hard and even surface after it is unloaded or after it has been
operated.
Place for fork-lift truck forks
insertion.
