ULTRASOURCE ULTRAVAC 2100 Owner'S Manual Download Page 35

Page: 35 / 123

THE NEW STANDARD FOR

INNOVATION

• [email protected] • UltraSourceUSA.com

UltraSource LLC • 1414 West 29th Street • Kansas City, MO 64108-3604 USA • 800.777.5624 • 816.753.2150

4.9

MAINTENANCE

Supervisor Menu on Digital Panel

PULSE OFF: 1.0

PULSE ON: 1.2

PULSE TO: 50

PULSE VENT: YES

YES

PROGRAM

YES

PROGRAM

YES

PROGRAM

YES

PROGRAM

PULSE VAC allows for a more controlled
vacuum process. Rather than simply
opening up the vacuum valve for a
continuous vacuum, the vacuum valve is
opened and closed repeatedly until the
chamber reaches the desired vacuum.
Press the MENU Key.

This is the % vacuum reached by pulsing
the vac valve.
The range is 90% to 30%.
Press the MENU Key.

This is how long the vacuum valve is
turned on during the vacuum cycle.
The range is 0 to 3 seconds.
Press the MENU Key.

This is how long the vacuum valve is
turned off during the vacuum cycle.
The range is 0 to 3 seconds.
Press the MENU Key.

Figure 4.9

PULSE VAC

Summary of Contents for ULTRAVAC 2100




























































































































Search results

Summary of Contents for ULTRAVAC 2100

Reviews:

Related manuals for ULTRAVAC 2100

Brands by name

Popular brands

ULTRASOURCE ULTRAVAC 2100, Owner'S Manual

Search results

Summary of Contents for ULTRAVAC 2100

Reviews:

Related manuals for ULTRAVAC 2100

Brands by name

Popular brands