ULTRASOURCE ULTRAVAC 2100, Owner'S Manual

Page: 14 / 123

THE NEW STANDARD FOR INNOVATION • info@UltraSourceUSA.com • UltraSourceUSA.com
UltraSource LLC • 1414 West 29th Street • Kansas City, MO 64108-3604 USA • 800.777.5624 • 816.753.2150
2.4
ST
ARTUP
Installation of Perforating Knives
CAUTION CAUTION
Blade hazard.
Do not remove, install, or replace blades without protective gloves. Perforating knife blade is
sharp. Use care when handling.
Remove standard seal bars. Install perforating bars with the cutting blade facing toward
the outside of the lid. The use of air-assist is required for proper operation. The air-assist
regulator should be set at 20 to 30 p.s.i., not to exceed 40 p.s.i.
As the backup strip wears, it can be removed and changed end for end for a better surface.
The strip may also be turned upside down when one side is worn.
Installation of Precut Knives
CAUTION CAUTION
Blade hazard.
Do not remove, install, or replace blades without protective gloves. Precut knife blade is sharp.
Use care when handling
Remove standard seal bars. Install precut seal bars with the blade facing toward the outside
of the lid. The use of air-assist is required for proper operation. The air-assist regulator
should be set at 20 to 30 p.s.i., not to exceed 40 p.s.i.
As the backup strip wears, it can be removed and changed end for end for a better surface.
The strip may also be turned upside down when one side is worn.
Figure 2.2
Precut Knife
this side
Excess Pouch