ULTRA SECURE
www.ultrasecuredirect.com
20
Volume settings
Microphone volume
You can set the UltraCOM 4G microphone volume to a level from 1 to 8. By default,
this volume is set to 5
. To modify it, you need to send the following command:
1234#MIC#X
Variable data
Meanings
1234
Default password, to be adapted if the password is changed.
X
Microphone volume level between 1 (
low
) and 8 (
high
).
Status request: To receive information about the microphone volume
setting, you can send the following command: 1234#MIC (
1234 being the
default password, to be adapted if it changes
).
To confirm the command, the UltraCOM 4G sends you a reply SMS. If this
SMS contains an error message (
ERR:
), refer to the error response table
(
see page 30
) to identify the cause.
Speaker volume
The UltraCOM 4G speaker allows the visitor to hear the user who picked up the
call. You can set the speaker volume to a level ranging from 1 to 5. By default, this
volume is set to 3
. To modify it, you need to send the following command:
1234#VOL#X
Variable data
Meanings
1234
Default password, to be adapted if the password is changed.
X
Speaker volume level between 1 (
low
) and 5 (
high
).
Status request: To receive information about the speaker volume setting,
you can send the following command: 1234#VOL (
1234 being the default
password, to be adapted if it changes
).
