ULTRA SECURE
www.ultrasecuredirect.com
30
Network status information
To check the quality of the network at the location of the panel, you can request
the status of the reception level when the UltraCOM 4G is in Installation mode. To
do this, press the call button on the front panel twice quickly. The behaviour of the
call button (
number of flashes
) will give you a reception level range.
Call button behaviour
Reception level
1 flash
Between 1 and 7/31 (
very weak
)
2 flashes
Between 8 and 16/31 (
moderate
)
3 flashes
Between 17 and 24/31 (
good
)
4 flashes
Between 25 and 31/31 (
excellent
)
Note that you can obtain the exact reception level by requesting a
status report
by SMS
from the panel (
see page 24
).
Error SMS replies
To confirm a command, the UltraCOM 4G sends you a reply SMS. If this SMS
contains an error message (
ERR:
), refer to the error response table below to identify
the cause.
SMS reply
Error
ERR: P
Wrong password
ERR: INVALID
Invalid command
ERR: AUTH
No permission
ERR: CONFIG
Wrong configuration (
e.g.: user list request
but no U01 registered
)
ERR: SIM
Wrong SIM number entered (
error message
after 5min
)
