ULTRA SECURE
www.ultrasecuredirect.com
16
Administrator and user settings
Administrator settings
For further information about administrator settings, see page 10.
User settings
For further information about user settings, see page 11.
Secondary user settings
For further information about secondary user settings, see page 11.
Delete users
If you need to delete users, you can do it simply with an SMS command. You will
need to know the position of the number you want to delete. For this, you can
request the list of registered numbers (
and their position
) with the status request
command (
see next section
).
The SMS command to delete users is as follows:
1234#UXX#0
Variable data
Meanings
1234
Default password, to be adapted if the password is changed.
XX
Position number of the user or secondary user to be deleted (
two digits,
01 to 59
).
Please note that this is the number 0 and not the letter O in capitals.
To confirm the command, the UltraCOM 4G sends you a reply SMS. If this
SMS contains an error message (
ERR:
), refer to the error response table
(
see page 30
) to identify the cause.
Status request command
To receive information concerning users, you can send the following status request
command:
1234#U
Variable data
Meaning
1234
Default password, to be adapted if the password is changed.
This command allows you to receive the list of all users with their associated
position and number.
