ULTRA SECURE
www.ultrasecuredirect.com
13
How UltraCOM 4G works
Call from the panel
When a visitor activates the call button, the UltraCOM 4G launches its call cycle
and will contact each registered user one by one. The number of call cycles can be
set between 1 and 5 (
see page 17
). During the cycle, the panel emits a ring tone
to indicate to the visitor that the call is in progress.
The panel ringing duration with each user can be set (
see page 17
).
When the user receives the call from the panel, he must pick up his telephone and
accept the call using the 0 key. He is then able to communicate with the visitor.
He can also activate the relays (
if connected
,
see page 14
) using key 1 for relay
1 and key 2 for relay 2.
Attention: the user who receives the call has an adjustable set time (
see
page 18
) to accept the call using the 0 key.
When a user accepts the call, the communication time with the visitor is
limited. This duration can be set by the admin (
see page 18
).
If the first user in the list does not accept the call (
pick up + press the 0 key
), then
the panel contacts the next user, and so on according to the number of call cycles
configured. The call ends when the configured number of cycles has been reached
or when a user picks up and accepts the call.
To end the call, the user can simply hang up his phone. The visitor can also end the
call by pressing the call button.
Call to the panel and opening of the relays
Users and secondary users can make a call directly to the panel. They can thus
communicate with their visitor (
ideal for putting on hold and calling back or for a
drive system for example
).
When the call is made, the user (
or the secondary user
) can activate relay 1 (
key 1
)
or relay 2 (
key 2
). The relays can also be triggered at any time via an SMS command
(
see page 15
).
