ULTRA SECURE
www.ultrasecuredirect.com
23
request the list of tie slots set (
and their position
) with the status request command
(
see next section
).
The SMS command to delete time slots is as follows:
1234#DND#D#nn
Variable data
Meanings
1234
Default password, to be adapted if the password is changed.
nn
Position number of the time slot to be deleted between 01 and 25.
Status request command
To receive information concerning time slots, you can send the following status
request command:
1234#DND
Variable data
Meaning
1234
Default password, to be adapted if the password is changed.
This command allows you to receive the state of the “Do not disturb” mode (
ON or
OFF
) and the list of all time slots with their position.
To confirm the commands concerning the “Do not disturb” mode, the
UltraCOM 4G sends you a reply SMS. If this SMS contains an error message
(
ERR:
), refer to the error response table (
see page 30
) to identify the
cause.
Programming example:
Do you want to disable the operation of the panel from 20:00 to 08:00 the next
day, every day of the week, so as not to be disturbed? We guide you with a
complete example.
To make the panel understand this, you need to record 2 time slots in the device
(
you have 25 time slots in total to refine your schedule
):
- First command:
1234#DND#A01#2000#2359#1234567
The time slot is scheduled from 20:00 to 23:59 every day.
- Second command:
1234#DND#A02#0000#0800#1234567
The time slot is scheduled from 00:00 to 08:00 every day.
The combination of these two commands allows you to create a time slot from
20:00 to 08:00, every day of the week. Then remember to activate the “Do not
disturb” mode using the SMS command.
