ULTRA SECURE
www.ultrasecuredirect.com
25
To receive this status report, simply send the following command:
1234#STATUS
Variable data
Meaning
1234
Default password, to be adapted if the password is changed.
Restart the panel
In the event of abnormal behaviour of the device, you have the option of restarting
the panel. To do this, simply send the following command:
1234#RESTART
Variable data
Meaning
1234
Default password, to be adapted if the password is changed.
To guarantee its proper functioning over the long term, the panel restarts
automatically every night at 04:00.
Reset the panel to factory settings
If you wish to permanently delete all saved settings on the UltraCOM 4G, you can
reset the panel to factory settings in two ways.
Option No. 1
, you can send the following SMS command:
1234#RESET#334455
Variable data
Meaning
1234
Default password, to be adapted if the password is changed.
To confirm the command, the UltraCOM 4G sends you a reply SMS. If this
SMS contains an error message (
ERR:
), refer to the error response table
(
see page 30
) to identify the cause.
Important: restarting does not affect your settings, and they are all saved.
To confirm the command, the UltraCOM 4G sends you a reply SMS. If this
SMS contains an error message (
ERR:
), refer to the error response table
(
see page 30
) to identify the cause.
