ULTRA SECURE
www.ultrasecuredirect.com
10
UltraCOM 4G basic settings
Follow the steps below to finalise the basic configuration of your intercom.
Using SMS commands
Administrator settings
The number defined as administrator will be
the only one who can configure the
UltraCOM 4G
. On the other hand, if you want this number to receive calls from the
panel, you will also have to define it as a user.
To set your number as administrator, you need to send the following command to
the UltraCOM 4G from your phone:
1234#ADMIN#334455
Variable data
Meaning
1234
Default password, to be adapted if the password is changed.
SIM card number settings
To ensure the correct configuration of the time and date, it will be necessary to
enter the number of the SIM card used in the UltraCOM 4G.
When a new admin is set up, a confirmation SMS (
confirming the new
number defined as admin
) will be sent to the new and the former admin.
Your UltraCOM 4G is configured using commands sent by SMS to the number
of the SIM card inserted in it (
see page 7
). All SMS commands begin with the
password (
4 digits
) followed by a #. The rest of the SMS command will depend
on the desired setting.
For each command sent, the UltraCOM 4G will send back a reply SMS. SMS
replies are listed in the command tables (
see page 31
). In the event of an
error when sending your command (
wrong password, invalid SMS, permission
refused...
), an error response will be sent to you (
see page 30
).
Important: The sample commands listed in this manual use the default
password 1234. If you change your panel's password (
see page 24
),
remember to use the new password for your SMS commands.
