ULTRAFRYER Systems PAR-3-14HE CE, Operating Instructions Manual

Page: 5 / 43

A. SAFETY
As with all deep Fat Fryers the major safety concern associated with the Ultrafryer Par3-14 CE Gas Fryer is
burns from hot shortening. In order to prevent serious burns, good housekeeping habits are required. The floor
in front of and the area around the fryer should be kept clean and dry. Whenever anything is placed in to a fryer
vat, care should be used not to splash the hot shortening. Product should always be “PLACED” into the short-
ening, NOT THROWN. Safety goggles, neoprene insulated gloves and an apron must be worn while filtering
or boiling-out a fryer vat. Electrical controls on all Ultrafryer CE Fryers operate on 230 volts single phase elec-
trical power. No adjustments or replacement of electrical controls should ever be attempted without first dis-
connecting electrical power. The fryer should never be operated with wet hands or while standing in water. To
do so can result in serious electrical shock or death.
B. DESCRIPTION / SPECIFICATIONS
The Ultrafryer Gas Fryer is constructed from 16 & 18 gauge, stainless steel, and is equipped with an Ultrastat
23 Cooking Computer. In addition, the fryer is equipped with the NEWLY developed Hard Dock Filtration
System that uses a stainless steel Filter Screen. The Customer has the option of ordering a Magnepad Filter
Screen that uses a Magnesol impregnated Filter Pad or a Paper filter pad in lieu of the S/S filter screen. The
dimensions, specifications and gas ratings are as follows:
SPECIFICATION ITEM 14" PAR-3-H CE
Overall Width 15 5/8" (397 mm)
Overall Depth 25 1/4" (641 mm)
Work Height 35 3/4" (908 mm)
Size Vat Container 14" x 14" (356 x 356 mm)
Shipping Cube 9.0 FT3 (.26 M3)
Shipping Weight 215 lbs (113 kgs)
Power Input 230 Volt 6 Amp 50 Hz 1 Ø
C. OPERATIONAL REQUIREMENTS
MODEL PAR-3-14HE CE OPERATIONAL REQUIREMENTS
ITEM PAR-3-14HE CE
Shortening Capacity High Level 45 lbs. (22.5 liters)
Shortening Capacity low Level 35 lbs. (17.5 liters)
Gas Valve Pressure Setting See Note Below
Orifice Drill Size See Note Below
Inlet Gas Pressure See Note Below
Energy Input 230 V 6 AMPS 50 HZ 1 Ø
NOTE: See European Pressures, Gases and Categories Table on page 4a-4c.
Page 1
30A134
This appliance is for Professional use and is to be used only by Qualified Personnel
GENERAL INFORMATION