ULTRAFRYER Systems PAR-3-14HE CE, Operating Instructions Manual

Page: 30 / 43

A. GENERAL COOKING
Most products should be cooked with a shortening temperature about 350˚F (177˚C); however, each product should be
cooked at the LOWEST temperature that produces a high quality product while obtaining maximum usage of the
shortening.
I – DO USE A HIGH QUALITY SHORTENING TO ACHIEVE A CONSISTENT QUALITY PRODUCT AND
LONG TERM SAVINGS
II – DO NOT SALT PRODUCTS OVER THE FRYER AS SALT QUICKLY DETERIORATES THE SHORTEN
ING AND FLAVORS OTHER PRODUCTS COOKED IN THE SAME SHORTENING
III – DO FILTER SHORTENING AFTER THE LUNCH AND DINNER RUSH AND MORE OFTEN IN A HIGH
SALE VOLUME STORE; AND BOIL-OUT THE FRYER EVERY 7 DAYS
NOTE: Startup steps 1, 2, 3, and 4 will have to be repeated each time any of the following occurs:
DRAIN VALVE IS OPEN. FRYER TOGGLE ON/OFF SWITCH IS TURNED OFF TO FILTER
SHORTENING OR BOIL-OUT A FRYER. FRYER TOGGLE ON/OFF SWITCH IS TURNED
OFF AT CLOSING OR ANY OTHER REASON.
When the Computer is taken out of the SHORTENING MELT MODE each morning, shortening in the fryer vat will be
heated to its SETPOINT temperature HEATING will appear in the display to indicate the shortening temperature is
MORE than 20˚F (-6.6˚C) BELOW the setpoint temperature. When shortening temperature rises to the SETPOINT tem-
perature, “
READY ” will appear in the display indicating a COOK CYCLE can be started.
B. STARTING A COOK CYCLE
To start a cook cycle simply press the product key for the (  ) product you wish to cook. If the product is programmed, the
correct cooking time will be displayed “ 1200 ” (example) and this time will immediately start to count down in minutes and
seconds. If “ DON’T ” is displayed immediately and the unit starts to signal, the key being operated is not programmed. If
correctly programmed, it will count down “ :00 ” to followed by and start to signal. To turn this signal OFF and reset the
Computer, press

the product key used to
start the COOK CYCLE.
C. CANCELLING A COOK CYCLE
If a cook cycle was inadvertently started it may be cancelled two (2) ways:
1) Press and hold the same product key (
 ) used to start the cook cycle for 4 SECONDS. This prevents an accidental start
of a cook cycle (

) while a product is being cooked.
2) A cook cycle can be CANCELLED at any time by turning the fryer ON/OFF Switch to the OFF position.
Press product key
Page 23
30A134