ULTRAFRYER Systems PAR-3-14HE CE, Operating Instructions Manual

Page: 31 / 43

A. FILTER TUB ASSEMBLY
ENSURE all components of the filter tub have been thoroughly cleaned and that the Filter Screen has been assembled ac-
cording to the CLEANING Section of this manual; then assemble the filter tub as follows:
1. Connect the KNURLED KNOB to the STANDPIPE
DOCKING HANDLE ASSEMBLY; then attach this assem-
bly to the SUCTION FITTING on the Filter Screen. DO
NOT OVERTIGHTEN THIS CONNECTION!!!
2. Place the Filter Screen in the bottom of the Filter Tub with
the screen butted against the rear wall of the tub.
3. Insert the Crumb Catcher Screen in the Filter Tub with the
Drain Valve DOCKING FLANGE and MALE DOCKING
PLUG over the leading edge of the pan.
4. Position the FILTER TUB COVER on the open end of the
Filter Tub with the SLOT on the cover seated around the
Standpipe Docking Handle Assembly. Then, SECURE the
cover to the standpipe assembly by locking the latch on the
cover.
B. FILTER TUB INSTALLATION
Position the ASSEMBLED Filter Tub in front of the FILTER
TUB GUIDES beneath the fryer; then CAREFULLY insert
the Filter Tub into the fryer using the standpipe handle assem-
bly until the MALE In-Line Plug on the Docking Handle Assembly
seats in the FEMALE Bulkhead Socket adjacent to the Drain Valve
Assembly.
WARNING!! CRUMBS AND SLUDGE LEFT IN THE FILTER TUB OVERNIGHT ARE A FIRE HAZARD!!
Filter Tub
Filter Tub Guides
Docking Release Handle
Hard Docking Connection
Page 24
30A134
FILTER TUB ASSEMBLY & INSTALLATION