Ulead DVD WORKSHOP 2 -, User Manual

Page: 102 / 136

102 ULEAD DVD WORKSHOP USER GUIDE
The Advanced Settings tab
The Advanced Settings tab allows you to adjust your burner’s settings and
enable error prevention functions before starting the burning process. You can also
burn additional folders that contain other related files onto a disc by enabling
options under
Output Advanced Settings .
Burner advanced settings Contains advanced options for handling your disc
burner.
• Perform writing test before burning Select to simulate the recording
process before burning data onto a disc. This checks if the system speed or CD-
ROM/DVD-ROM speed is fast enough to send data to the burner device at the
specified write speed.
If your burning device has Buffer Underrun Protection and it is enabled, you can
clear
Perform writing test before burning to save time when burning.
• Buffer underrun protection Select to ensure an uninterrupted flow of data to
minimize the risk of error in the burning process. This option is only enabled if
your burning device has buffer underrrun protection capability.
A buffer underrun occurs when the computer system fails to deliver data quickly
enough to the CD writer for it to burn the data properly.
• Quick eject (Short Lead-out) (DVD+RW discs) Select to replace the lead out
with a border out section and speed up the finalization process. DVD-ROM
requires at least 1GB of data on the disc. If your project is less than 1GB,