UBI EasyCoder 501 – Service Manual
20
3. HATCHES AND DOORS
3.1
Right-Hand Door
The right-hand door gives access to:
• The paper supply
• The ribbon supply
• The print mechanism
The right-hand door is fitted to the bottom plate by means of two
hinges that allow the door to be swung down 180˚ to a vertical
position. The door is kept shut by means of a magnetic lock. The
door can easily be removed from the hinges by pushing it forward
until the snap-lock at the rear hinge disengages.
At the inside of the door, there is a label showing how to load the
paper and the transfer ribbon.
The standard door can be replaced by an optional door provided
with a clear panel for easier view of the ribbon and paper supplies.
The hinges can be adjusted by means of the two pairs of #T10 Torx
screws visible on the outside. Possibly, the other parts of the hinges,
which are fitted to the bottom plate, may require adjustment too.
Shut the door, loosen the screws slightly and align the door with the
front moulding. Tighten the screws and check that the door runs
freely and is kept shut by the magnetic lock.
Magnetic Lock
Hinges
Label
Optional Clear Panel
