Rev: 2015.06.28.v01c
page 38
center of
gravity
control
throws
C.G. - 295mm from nose of aircraft
Locate all the electronic to achieve
indicated CG point. Use Velcro for
initial ights for battery mounting and
experiment with it’s position until you
have determined the best spot for your
ying style. For best 3D performance,
balance for level ight upright and
inverted with little to no elevator input.
Also power off down line should be
straight down without any pull or tuck.
Extreme & 3D
Ailerons: Up 45 deg Dn 30 deg
Rudder: +/- 40 deg
Elevator: +/- 45 deg
Expo to suit
Beginner & Sport
Ailerons: Up 25 deg Dn 15 deg
Rudder: +/- 20 deg
Elevator: +/- 25 deg
Expo to suit
In order to achieve the control throws as
described for “Extreme and 3D, it is
imperative that the control surfaces,
linkages, rod ends, etc, all move freely
over the entire range, including range
end points.
Failure to do so will result in damage to
either the servos or mechanical
components
CG = 295mm
