Rev: 2015.06.28.v01c
page 18
Fit the three center bridge pieces
together as shown above. It may be
necessary to sand of le on the mating
area.
Make sure the orientation of the three
parts is as shown in this picture and
the previous one
With thin CA and kicker, glue the three
pieces together.
Locate the body half shown above and
split it in the tabbed area. Using the
small points in the foam as a guide to
where the center of the tab is.
Repeat the process for the second nut
insert
With a little dap of Welders attach the
nut insert as shown. Keep the threaded
area free of glue.
