Rev: 2015.06.28.v01c
page 37
That nishes the airframe. Double
check that everything is attached as
shown above and that you have used
all the parts in the box.
Route the ESC power wire down thru
the cabin oor, install your receiver and
make all the connections. Depending
on your install you may need two short
servo extensions
Depending on how you locate your
ESC, you may or may not need an
extension for the battery. Extra long
one shown above.
Program all the features/mixes you
want and set the control throws per the
setup chart on the following page. For a
DX9 SPM le, see the RC Groups
Thread for this model.
Approximate battery location for CG.
For extreme 3D ying use a strap in
additon to the velcro patch to secure
the battery.
About Leading Edge Flaps
Unlike Leading Edge “Slats”, that
are designed to promote airow
over the top of the wing, Leading
Edge “Flaps” are control surfaces
on the front of the wing. They
provide for increased roll authority
especially at slow stalled speeds,
increased wing angle of attack for
those ultra short takeoffs and for
harriers they provide even greater
drag that promotes better handling
by increasing the power setting, as
well as ensuring the wing is
completely stalled reducing the
amount of rudder input required to
eliminate wing rock.
