Chapter 4 Flow measurement
- 36 -
entering and affecting the transmission of ultrasonic signals.
4.3.2. The installation and use of the bracket probe
4.3.2.1.
Use method of bracket probe
1. Options of bracket probe in M23 menu:
Medium Stent Probes (HM), High Temperature Medium Stent Probes (HM-HT) :
standard HM stent sensors
Small bracket probe (HS), high temperature small bracket probe (HS-HT) :
standard HS small bracket sensor
2. According to the installation distance of ultrasonic sensor indicated in the menu
of ultrasonic flowmeter M25, the required measurement shall be made
The pipeline is clean and the area is larger than the sensor.Metal pipes should be
treated with a grinder, file, or sandpaper until
All see the metallic sheen.
3. According to the ultrasonic sensor installation distance indicated in the menu
M25 of the ultrasonic flowmeter, according to the bracket probe
Adjust the position of the sensor on the scale and fix it with the lock nut.
4. Rotate the top rod of the probe, screw the upper and lower sensors of the probe
of the bracket to the top, and apply a 2~3cm pole
Special coupling agent for acoustic wave (or special coupling agent for high
temperature ultrasonic wave).
Summary of Contents for MC-SUP2000H
