Page 52 of 85 Pages
When entering the START CYCLE BY CLOCK screen, the
time is displayed. The cursor is blinking on the "minute" digit.
The time is displayed in the form “HH:MM”. The hour range is
24 hours (i.e. from "0" to "24").
Enabling the START CYCLE BY CLOCK
1.
To increase or decrease the time use the UP or DOWN
keys.
2.
To move the cursor from one digit to another press the
START/STOP key.
3.
After changing the time move the cursor to Enabled
4.
Confirm the START CYCLE BY CLOCK by pressing
UP or DOWN keys.
5.
Move the cursor by pressing START/STOP key to Exit
and press UP or DOWN keys to return to ADVANCED
OPTIONS screen.
Canceling the START CYCLE BY CLOCK
1.
To cancel the START CYCLE BY CLOCK move the
cursor by pressing START/STOP key to Disable and
press UP or DOWN keys.
2.
Move the cursor to EXIT by pressing START/STOP key
and press UP or DOWN keys, the START CYCLE BY
CLOCK will be canceled.
