Tuttnauer 5050 Operation & Maintenance Manual Download Page 49

Page: 49 / 87

Page 47 of 85 Pages

Move the cursor to the required item and press
START/STOP key

The following screen will be displayed:

Remove the USB device from the USB Socket

In order to exit this screen and return to HISTORY
OPTIONS screen press START/STOP key.

In order to exit the HISTORY OPTIONS screen follows
one of the next:



Move the cursor to Exit with the UP or DOWN keys
and select it by pressing the START/STOP key.



Press the UP and DOWN keys simultaneously.

6.5

Maintenance

This directory includes four subdirectories
The following screen will be displayed when entering MAINTENANCE
directory:

1. In order to enter to the sub directories move the cursor by pressing

UP or DOWN keys to the required item and press START/STOP
key

2. In order to exit this screen follows one of the next:



Move the cursor to Exit with the UP or DOWN keys and select it
by pressing the START/STOP key.



Press the UP and DOWN keys simultaneously.

Summary of Contents for 5050
























































































Search results

Summary of Contents for 5050

Reviews:

Related manuals for 5050

Brands by name

Popular brands

Tuttnauer 5050, Operation & Maintenance Manual

Search results

Summary of Contents for 5050

Reviews:

Related manuals for 5050

Brands by name

Popular brands