Tuttnauer 5050 Operation & Maintenance Manual Download Page 44

Page: 44 / 87

Page 42 of 85 Pages

Move the cursor to Admin and press START/STOP key. The
following screen will be displayed:

0000 is displayed on the screen with the cursor blinking on the right
digit.

To increase or decrease the digits, press the UP or DOWN keys.

After changing the code to 0001 move the cursor to Set by pressing
the START/STOP key.

When Set is blinking, press the UP or DOWN keys to enter the
MAIN MENU of the autoclave.

The following screen will be displayed:

In order to exit the ENTER CODE screen move the cursor to Exit
by pressing START/STOP Key. when Exit is blinking press UP or
DOWN keys.

To browse through the directories, use the UP or DOWN keys.

When the required directory is blinking, press the START/STOP
key. The required screen will be displayed.

In order to exit this screen follows one of the next:



Move the cursor to Exit with the UP or DOWN keys and
select it by pressing the START/STOP key.



Press the UP and DOWN keys simultaneously.

Summary of Contents for 5050
























































































Search results

Summary of Contents for 5050

Reviews:

Related manuals for 5050

Brands by name

Popular brands

Tuttnauer 5050, Operation & Maintenance Manual

Search results

Summary of Contents for 5050

Reviews:

Related manuals for 5050

Brands by name

Popular brands