Tuttnauer 5050 Operation & Maintenance Manual Download Page 47

Page: 47 / 87

Page 45 of 85 Pages

The time is displayed in the form “0000” min.

To increase or decrease the digits, press the UP or DOWN
keys.

After changing the value move the cursor to Set by pressing
the START/STOP.

When Set is blinking, press the UP or DOWN keys in order
to confirm changes and return to the previous screen.

In order to exit this screen follows one of the next:



In order to exit this screen move the cursor to Exit with
the START/STOP key and select it by pressing the UP
or DOWN keys.



Press the UP and DOWN keys simultaneously.

6.4

History

This directory includes two subdirectories
The following screen will be displayed when entering HISTORY
directory:

1. In order to enter to the sub directories move the cursor by pressing

UP or DOWN keys to the required item and press START/STOP
key

2. In order to exit this screen follows one of the next:



Move the cursor to Exit with the UP or DOWN keys and select it
by pressing the START/STOP key.



Press the UP and DOWN keys simultaneously.

Summary of Contents for 5050
























































































Search results

Summary of Contents for 5050

Reviews:

Related manuals for 5050

Brands by name

Popular brands

Tuttnauer 5050, Operation & Maintenance Manual

Search results

Summary of Contents for 5050

Reviews:

Related manuals for 5050

Brands by name

Popular brands