Tuttnauer 5050 Operation & Maintenance Manual Download Page 46

Page: 46 / 87

Page 44 of 85 Pages



Press the UP and DOWN keys simultaneously.

7.3.2

Print Rate Sterilization

This subdirectory enables to change the printing rate during
sterilization stage.

To increase or decrease the digits, press the UP or DOWN
keys.

After changing the value move the cursor to Set by pressing
the START/STOP.

When Set is blinking, press the UP or DOWN keys in order
to confirm changes and return to the previous screen.

In order to exit this screen follows one of the next:



In order to exit this screen move the cursor to Exit with
the START/STOP key and select it by pressing the UP
or DOWN keys.



Press the UP and DOWN keys simultaneously.

7.3.3

Screen Saver
This subdirectory enables the operator to set the screen saver
time.
The default time value is 90 minutes. It is possible to increase
or decrease the time value up to a maximum of 600 minutes or
down to a minimum 0 minutes.

When entering the Screen Saver screen, the time will be
displayed. The cursor is blinking on the "minute" digit.

Summary of Contents for 5050
























































































Search results

Summary of Contents for 5050

Reviews:

Related manuals for 5050

Brands by name

Popular brands

Tuttnauer 5050, Operation & Maintenance Manual

Search results

Summary of Contents for 5050

Reviews:

Related manuals for 5050

Brands by name

Popular brands