Tusa ZEN AIR IQ-950 Owner'S Manual Download Page 110

Page: 110 / 137

111

• S (< 2 sec) to toggle ON/OFF (Start/Stop).

• A (< 2 sec) to access ALT 2.

• If no button is pressed during a period of 10 seconds,

operation will revert to the Main.

• L (press) to activate Backlight.

Free Dive ALT 2,

information includes (Fig. 114) -

> Time of Day (hr:min) with clock and AM (or PM) icons.

> Max Depth with MAX and FT (or M) icons.

• A (< 2 sec) to revert to the Main, or after 5 seconds if A is not

pressed.

• L (press) to activate Backlight.

FREE DIVE ALARMS

Free Dive alarms sound 3 short beeps (1 or 3 times) as an indication that an event is oc-

curring and as a reminder to view the display to identify an event.

As the Audible sounds, a graphic identifying the event will flash in place of NDC Time.

Free Dive alarms are separate and unaffected by NORM/GAUG mode alarm settings,

and the Alarms that occur in those modes are separate and unaffected by Free Dive

alarms.

Fig. 114 - FREE ALT 2

Summary of Contents for ZEN AIR IQ-950










































































































































Search results

Summary of Contents for ZEN AIR IQ-950

Reviews:

Related manuals for ZEN AIR IQ-950

Brands by name

Popular brands

Tusa ZEN AIR IQ-950, Owner'S Manual

Search results

Summary of Contents for ZEN AIR IQ-950

Reviews:

Related manuals for ZEN AIR IQ-950

Brands by name

Popular brands