Tusa ZEN AIR IQ-950 Owner'S Manual Download Page 127

Page: 127 / 137

128

CAN BE USED AS

• Watch

• Air Computer

• Nitrox Computer

• Digital Depth Gauge/Timer

• Free Dive Depth Gauge/Timer

DIVE COMPUTER PERFORMANCE

• Buhlmann ZHL-16c based Pelagic Z+ algorithm

• No Deco limits closely follow PADI RDP

• Decompression in agreement with Buhlmann

ZHL-16c and French MN90

• No Deco Deep Stops - Morroni, Bennett

• Deco Stops (not recommended) - Blatteau,

Gerth, Gutvik

• Altitude - Buhlmann, IANTD, RDP (Cross)

• Altitude corrections and O2 limits based on

NOAA tables

WATCH MODES

• Default Time (selected for current location)

>> ALT (Altitude, Temp, Date)

>> Set Time, Date, Format

• Alternate Time (remote location)

>> Set by hour differential

• Countdown Timer

>> Start, Stop, Set

• Chronograph (Stop Watch/Lap Timer)

>> Start, Stop, Lap Recall, Reset

• Daily Alarm

>> On, Off, Set

DIVE COMPUTER SURFACE SEQUENCE/MODES

• NORM >> GAUG >> FREE Surface Main

• SURF ALT (Altitude, Temp, Time)

• Plan (30 to 190 FT, 9 to 57 M) - NORM only

• Time to Fly - NORM/GAUG

• Time to Desaturate - NORM only

• Dive Log >> History - NORM/GAUG

• Set >> FO2, Alarms, Utilities - NORM/GAUG

NORM/GAUG SET MODES

• Set F Group (FO2 items):

• FO2 GAS 1 (Air, 21 to 50%)

• FO2 GAS 2 (Air, 21 to 100%)

• FO2 GAS 3 (Air, 21 to 100%)

• FO2 Default (On/Off)

• Set A Group (Alarms):

• Audible (On/Off)

• Max Depth (30 to 330 FT, 10 to 100 M)

• Elapsed Dive Time (:10 to 3:00 hr:min)

• NiBG (1 to 5 segments)

• Dive Time Remaining (:00 to :20 min)

• Turn Pressure (1000 to 3000 PSI, 70 to 205 BAR)

• End Pressure (300 to 1500 PSI, 20 to 105 BAR)

• PO2 (1.20 to 1.60 ATA)

• Set U Group (Utilities):

• Wet Activation (On/Off)

• Units of Measure (Imperial/Metric)

• No Deco Deep Stop (On/Off)

• No Deco Safety Stop (On/Off)

• Conservative Factor (On/Off)

• Backlight Duration (0, 5, 10 seconds)

• Sampling Rate (2, 15, 30, 60 seconds)

• TRT 1, 2, 3 Link Code (SN)

SPECIFICATIONS

Summary of Contents for ZEN AIR IQ-950










































































































































Search results

Summary of Contents for ZEN AIR IQ-950

Reviews:

Related manuals for ZEN AIR IQ-950

Brands by name

Popular brands

Tusa ZEN AIR IQ-950, Owner'S Manual

Search results

Summary of Contents for ZEN AIR IQ-950

Reviews:

Related manuals for ZEN AIR IQ-950

Brands by name

Popular brands