Tusa ZEN AIR IQ-950 Owner'S Manual Download Page 19

Page: 19 / 137

WATCH ALT DISPLAY

, information includes (Fig. 10):

> Altitude graphic (EL2 to EL7), if above 3000 feet (915

meters), blank if below.

> Temperature with degrees icon and graphic F (or C).

> Date (Month.Day or Day.Month).

• After 5 seconds, operation will revert to the Watch Default

Time screen.

• A (< 2 sec) will revert to the Watch Default Time screen.

• L (press) will activate the Backlight.

SET MAIN TIME

This mode allows the Date and Time of Day to be set which will also serve as the basis for

Watch Alternate Time values.

> Set screens >>> Date Format >> Hour Format >> Time >> Date

> Day of the Week is set automatically when the Date is set.

> When the ZEN AIR is operating in Dive Computer mode, Date is displayed only to

identify dives when they are accessed in the LOG Mode

• A (repeatedly, < 2 sec each time) will step through the menu items.

• M (2 sec) at any time, or if no button is pressed during a period of 2 minutes,

operation will revert to the Watch Default Time screen.

Fig. 10 - WATCH ALT

Summary of Contents for ZEN AIR IQ-950










































































































































Search results

Summary of Contents for ZEN AIR IQ-950

Reviews:

Related manuals for ZEN AIR IQ-950

Brands by name

Popular brands

Tusa ZEN AIR IQ-950, Owner'S Manual

Search results

Summary of Contents for ZEN AIR IQ-950

Reviews:

Related manuals for ZEN AIR IQ-950

Brands by name

Popular brands