Tusa ZEN AIR IQ-950, Owner'S Manual

Page: 115 / 137

116
CARE AND CLEANING
Protect your ZEN AIR from shock, excessive temperatures, exposure to chemicals, and
tampering. Protect the lens against scratches with a Instrument Lens Protector. Small
scratches will naturally disappear underwater.
• Soak and rinse the ZEN AIR in fresh water at the end of each day of diving, and
check to ensure that the areas around the Low Pressure (Depth) Sensor (Fig. 120a),
PC Interface Data Port (Fig. 120b), and Buttons are free of debris or obstructions.
Soak and rinse the Regulator(s) with the Transmitter(s) attached.
• To dissolve salt crystals, use lukewarm water or a slightly acidic bath (50% white
vinegar/50% fresh water). After removal from the bath, place the ZEN AIR and the
Regulator(s) with Transmitter(s) unit under gently running water and towel dry before
storing.
• Transport your ZEN AIR system cool, dry, and protected.
INSPECTIONS AND SERVICE
Your ZEN AIR should be inspected annually by an Authorized
TUSA Dealer who will perform a factory prescribed function
check and inspection for damage or wear. To keep the 2 year
limited warranty in effect, this inspection must be completed
one year after purchase (+/- 30 days).
TUSA recommends that you continue to have an inspection
performed every year to ensure it is working properly. The
costs of annual inspections are not covered under the terms of
the 2 year limited warranty.
Fig. 120 - CASE BACK
b
a