123
• Carefully place the Battery Hatch with Spring into the
Housing and turn clockwise slowly by hand to ensure
proper threading. Apply a coin and tighten until secure.
The outer surface of the Battery Hatch should be flush with
the outer surface of the Housing (Fig. 131).
ZEN AIR System Testing
• Pressurize the Regulator Assembly (and Transmitter).
• Verify that the Link icon is displayed.
• Press the S button for 2 seconds to check the Status screens.
• If a Low Battery Condition is indicated, return your ZEN
AIR with TRT to an Authorized TUSA Dealer for a complete
evaluation before attempting to use it.
INSTALLING A TRANSMITTER ON A REGULATOR
To install the TRT on the Regulator First Stage:
• Remove the existing Pressure Gauge and High Pressure
Hose, or the High Pressure Port Plug from the port marked
HP using the proper size hex key.
• Lightly lubricate the O-ring and threads of the Transmitter
fitting with a halocarbon based lubricant such as Christo-
Lube MCG111 (provided in TUSA Battery Kits).
• Thread the Transmitter clockwise by hand into the
Regulator's HP Port (Fig. 132) and tighten until secure with
a 5/8" open-end wrench.
Fig. 131 - TRT BATTERY
HATCH INSTALLED
Fig. 132 -INSTALLING A TRT
ON A REGULATOR
Summary of Contents for ZEN AIR IQ-950
