Tusa ZEN AIR IQ-950, Owner'S Manual

Page: 27 / 137

28
CHRONOGRAPH (Stop Watch/Lap Timer)
• M (3 times, < 2 sec each time) while the Watch Default
Time screen is displayed will access the Chronograph
displaying the elapsed time if previously started or
0:00:00.00 (hr:min:sec.1/100th sec), flashing.
• S (< 2 sec) will Start the Timer which will begin counting up
from 0:00:00.00 to 9:59:59.99 (hr:min:sec.1/100th sec)
in increments of .01 (1/100th sec).
• During the first 4 seconds the 1/100th second values will
be displayed after which 2 dashes ( . - - ) will be displayed
(Fig. 19). The 1/100th values will be recorded and
displayed when Laps are frozen and when later recalled.
• Subsequent presses of S (< 2 sec each time) will freeze Lap
Times (LAP 1 through LAP 9). After 9 Laps are recorded,
additional Laps will replace LAP 9, shift the others to lower
LAP numbers, while discarding LAP 1.
• If the Timer reaches 9:59:59.99 hr:min:sec.1/100 sec),
it will stop and save that number as a LAP. Subsequent
presses of S will then have no effect.
• A (< 2 sec) will Stop the Timer and Recall LAP #1,
displaying the graphic LAP and Lap Time with the Lap #.
Repeat presses will display other Laps/Times (Fig. 20).
• A (2 sec) will Stop the Timer and Reset the Time to
0:00:00.00 (flashing).
• M (< 2 sec) will access the Daily Alarm Status screen.
• M (2 sec) will revert to the Watch Default Time screen.
Fig. 20 - LAP RECALL
Fig. 19 - CHRONOGRAPH